“
Exclusive jewelry pin CT Agro
Such a product will not only please the owner but also emphasize the status of the company.
Such a product will not only please the owner but also emphasize the status of the company.
Special features of our pins
How jewelry pins differ from the haberdashery ones.
Curved surface
The curved surface intensely reflects light, which is great for its gloss. This pin looks three-dimensional and elegant. At the same time, it is not heavier than flat counterparts as there is an undercut on the reverse side. This solution also favorably distinguishes jewelry pins from haberdashery ones.
Reliable fastening
There is an anti-rotation lock on the pins - it is located next to the needle, but does not pierce the fabric, just rests against it. This prevents the pin from rolling over while wearing. There is also a special groove on the needle - it helps to securely fix the butterfly collet (fastener).
We conducted a test - fastened our pin on a dress and washed it in the washing machine. After a spin of 1000 rpm, the pin remained strictly in the place where it was fixed. Moreover, its position did not change either. With such mount, the pin is almost impossible to lose.
We conducted a test - fastened our pin on a dress and washed it in the washing machine. After a spin of 1000 rpm, the pin remained strictly in the place where it was fixed. Moreover, its position did not change either. With such mount, the pin is almost impossible to lose.
Jewelry enamel
In our products we use only jewelry enamel (made in Italy). Its main advantage is that after application it can be sawed together with the metal, then polished. The result is a completely homogeneous surface without sags and gaps (by the way, it also passed the wash test). If you run your finger over the surface of the pin without looking, the borders of the metal and enamel will be imperceptible.
Also, an extensive palette of shades makes it possible to choose the color of your logo as accurately as possible.
Also, an extensive palette of shades makes it possible to choose the color of your logo as accurately as possible.
More visualizations
Our steps towards your design and other layout interpretations
!
Before - After
Below are some examples of how differently you can approach the solution of the same problem.
One of the first-string Russian banks "Alfabank"
- Someone before usA pin made of 14k gold. Besides the obvious, the logo is also broken here. In the original, there is a gap between the "A" and the underline.
- With this mount, the pin may roll over. Also, there is no groove on the needle itself so that the collet does not slip.
- Our workWhite 14k gold. The pin is assembled from three parts. This is done in order to be able to process all surfaces after casting and only then assemble the pin.
- Here you can see the anti-rotation lock and the groove on the needle. And the holes under the gems are cut to match the openwork in the best jewelry traditions. This approach can only be seen on expensive branded products. In other cases, there are just round technical holes after the drill.
Leading leasing company "Europlan"
- Someone before us925 silver pin.
- Please pay attention to the outlines of the letters.
- To prevent the pin from rolling over, our colleagues decided to make two needles! So clothes have to be pierced in two places ...
- Our workThe main wish of the customer was that the top view remained unchanged. We have kept all the proportions of the logo, made a convex surface, and of course, another enamel!
- Gold 14k
One of the services of the Ministry of Defense
- Someone before usThis was sent as a sample
- Here is a layout made by the customer's artists
- Our workThis is our 3D layout
- Pin made of 925 silver and 585 yellow gold. It is assembled from 5 parts.
A little about us
Jewelry atelier
Diamond-Gift is a structural unit of the jewelry atelier 3D-diamond engaged in the development and manufacture of branded promotional products from precious metals using precious and semi-precious inserts, as well as jewelry enamels.
“
In other words we make pins/cufflinks/keyrings and various products
with your company logo of gold/silver/platinum (and not only)
with enamels/diamonds and more.
with your company logo of gold/silver/platinum (and not only)
with enamels/diamonds and more.
Dear colleagues!
The 3D-DIAMOND company has been in the jewelry market since 2012. We control the high quality of our products at all stages of production: from sketch and model to finished product. Each jeweler who will work with your order has at least ten years of experience in their industry. In order to guarantee high quality, we are constantly improving production processes and adopting the secrets of the craft from the older generations of craftsmen. This continuity and competence in the culture of the company is a guarantee of trust among customers and employees.
At the moment, "3D-DIAMOND" is actively developing the line of business souvenirs and corporate gifts. This direction is fully consistent with the mission and values of our company. We see them in the fact that our gifts help companies and organizations operate in various areas of business in Russia and abroad to establish warmer and more trusting relationships with their employees, clients and partners.
We make not just a product, but we embody an idea that will bring additional success.
The 3D-DIAMOND company has been in the jewelry market since 2012. We control the high quality of our products at all stages of production: from sketch and model to finished product. Each jeweler who will work with your order has at least ten years of experience in their industry. In order to guarantee high quality, we are constantly improving production processes and adopting the secrets of the craft from the older generations of craftsmen. This continuity and competence in the culture of the company is a guarantee of trust among customers and employees.
At the moment, "3D-DIAMOND" is actively developing the line of business souvenirs and corporate gifts. This direction is fully consistent with the mission and values of our company. We see them in the fact that our gifts help companies and organizations operate in various areas of business in Russia and abroad to establish warmer and more trusting relationships with their employees, clients and partners.
We make not just a product, but we embody an idea that will bring additional success.
Samples of our products
Visit our website
Here you can find our full portfolio
Jewelry atelier 3D-Diamond has many years of experience in the production of exclusive jewelry. We love our job and know how to do it professionally. Each of our brainchild is a work of art, which we treat carefully, seriously and with awe, like a masterpiece, at all stages of its creation: from developing a layout to handing it over to the customer.
Why we are proud of our jewelry
We are trustworthy
Here are just some of the organizations that we were able to please with our pins.
Why you will like to work with us
Diamond-Gift is your reliable supplier
- PROFESSIONALDiamond-Gift has a professional team that is able, in cooperation with your representatives, to select the type of product that is best suited to solving specific business or personnel problems, and then bring the order to the required production result, which exactly meets corporate standards.1
- PROFITABLEMany years of experience in the Russian market allow us to achieve the ultimate optimization of production processes and offer you the most favorable terms for the purchase of our products.2
- CREATIVEAn individual approach to cooperation on all your projects is a rule for us, and we are sure that we will always find ways to satisfy your requests regarding the final product.3
- RELIABLEWe value your time and always focus on the shortest terms of launching products into production and prompt delivery. For us, compliance with the contractual deadlines and the quality of the supplied products is a matter of professional reputation and a factor of market success.4
- FASTWe work as fast as jewelry production technology allows.5
- PHASEDIf the order amount exceeds 4.000.000 rubles and the production time is more than 60 days, a phased payment is provided - an advance payment of 70%, the rest after all the work has been completed (before shipment).6
Contact Us
- Russian Federation
MOSCOWProduction: 107076, Moscow, Stromynka St., 18
Office: 117342, Moscow, Butlerova St., 17Phone/whats app: +7 925 088 95 55
E-mail: zakaz@3d-diamond.ru
- The United Arab Emirates
DUBAIOffice: Dubai, Sh. Zayed road,
Onyx Tower 2, Office 1107Phone/whats app: +971 50 394 90 37
E-mail: zakaz@3d-diamond.ru